The cooker hood is one of the essential appliances in the kitchen, it can remove the fumes in the kitchen. Therefore, it is a good helper for every mother. It can not only cooperate with the kitchen, but also maintain strong suction power to discharge kitchen fumes, so that every housewife and housewife can cook in a kitchen without oil fumes. Happy and comfortable experience. Currently, there are countless brands of range hoods on the market. There are many types of range hoods, such as regular side range hoods. Many people buy side hoods but don't know how to install them. So let me introduce it to everyone below.

How to Install a Range Hood

I. Side range hood

1 installation steps. Determine the installation location of the side-draft range hood. The distance between the bottom of the side-draft range hood and the hob should be kept close enough for 35 minutes. Based on the size of your specific range hood product, find where the gussets are on the back and draw the lines with a pencil.

2. Drill holes and install the hanger plate

After determining the position and installation position of the hanging plate, use an impact drill to drill a hole with a depth of 5-6cm on the installation position, press the expansion pipe into the hole, and then use the screw to securely fix the hanging plate.

3. Hang the range hood on the hanging plate

The version behind the cooker hood can be embedded into the hanger plate to hang the cooker hood.

4. Install the exhaust pipe

Side hood: direct suction or side suction is better

Insert one end of the smoke exhaust pipe into the slot between the inner and outer rings of the air outlet of the check valve, and fix it with screws. The other end extends directly to the outdoors through a reserved hole. If the exhaust pipe is connected to the common flue, it must be connected and sealed with the common flue smoke check valve. If the smoke is vented out of the wall, it is advisable to install shutters on the outside of the exhaust duct to avoid refilling the smoke.

5. Install the expansion cover

This only applies to products that require an extension cover to be installed. As mentioned before, if you need to install the expansion cover, you must install the hanging plate first. Then snap on the extension cover after installing the cooker hood and exhaust pipe.

6. Install the oil cup and other accessories

Next, only the oil cup, face shield and other accessories for installing the hood are left. After the accessories are installed, the cooker hood is basically installed.

2. How to use the side range hood

1. In the shutdown state, press the "strong" and "weak" keys to start the hood, and run in strong wind/weak wind state, the "strong" and "weak" keys have an interlock function.

2. The "Light" key is used to control the lighting separately. Press once to turn on the bulb, then press again to turn off the bulb.

3. In the power-on state, press the "Close" button to stop the hood from running.

The above is the installation method of the side extractor hood introduced by the editor. Maybe you are not familiar with this range hood before, so you don't know how to install it when you buy the upper range hood. Usually you use a straight row hood, and the structure of the test hood is relatively complicated, so install it. It's a bit of a hassle. Not sure how to install if you can follow my installation method. I have explained it in detail here. If everyone bought a car and a range hood at home. You can follow the editor's method step by step, I hope it helps everyone.